Welcome, Guest
Username: Password: Remember me

TOPIC: 996997 timings

996997 timings 1 year 3 months ago #446

  • MushkinSean
  • MushkinSean's Avatar
  • OFFLINE
  • Administrator
  • Posts: 581
  • Thank you received: 87
  • Karma: 35
I see, I was wondering if you were experimenting. :)

Have you tried experimenting with more CPU/NB frequency?
I see yours is at default, 2200MHz.
The administrator has disabled public write access.

996997 timings 1 year 3 months ago #448

  • Rittmeier
  • Rittmeier's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 11
  • Karma: 0
Yes and no. I've been trying to get F@h stable and so I haven't gone far into overclocking the cpu/nb. That's next on the list though.
CVF-Z (1503) | FX-8350 @ 4.6ghz @ 1.48125v | cpu/nb @ 2600 @ 1.35v | ht @ 2600 | 8gb (2x4) Redlines (996997) @ DDR3-2133 (9-11-10-28-1T ) | GTX 570 | 850Z PSU
The administrator has disabled public write access.

996997 timings 1 year 3 months ago #451

  • MushkinSean
  • MushkinSean's Avatar
  • OFFLINE
  • Administrator
  • Posts: 581
  • Thank you received: 87
  • Karma: 35
Ahh more overclocking to do. :)
Getting the CPU/NB frequency higher should help with overall memory performance.
The administrator has disabled public write access.

996997 timings 1 year 3 months ago #452

  • Rittmeier
  • Rittmeier's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 11
  • Karma: 0
It really flies with the higher cpu/nb, but will take days to test stability.
Attachments:
CVF-Z (1503) | FX-8350 @ 4.6ghz @ 1.48125v | cpu/nb @ 2600 @ 1.35v | ht @ 2600 | 8gb (2x4) Redlines (996997) @ DDR3-2133 (9-11-10-28-1T ) | GTX 570 | 850Z PSU
The administrator has disabled public write access.

996997 timings 1 year 3 months ago #454

  • MushkinSean
  • MushkinSean's Avatar
  • OFFLINE
  • Administrator
  • Posts: 581
  • Thank you received: 87
  • Karma: 35
Yeah the CPU/NB tends to be the memory bottleneck, especially when using higher memory frequencies.
Nice increase with that higher CPU/NB frequency!
The administrator has disabled public write access.

996997 timings 10 months 2 weeks ago #1642

  • Rittmeier
  • Rittmeier's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 11
  • Karma: 0
Hi Sean,

Bringing back the old thread for recommended settings again. Ever since your following recommendation I have been completely stable at 2133mhz:

CAS# Latency = 9
RAS# to CAS# Delay = 11
RAS# PRE Time = 10
RAS# ACT Time = 28
READ to PRE Time = tRTP 8
RAS# to RAS# Delay = tRRD 7
CAS# WRITE Latency = Auto (8 tCWL is normally equal to or -1 of CAS# Latency, so it is correct
WRITE Recovery Time = tWR 16
REF Cycle Time = Auto (300ns)tRFC in the XMP it is clocks, AMD uses ns, 160ns should be fine. (not being allowed.)
ROW Cycle Time = 38
Command Rate = 1T

Can you recommend some 2400mzh timings & settings for me to test please?

Thanks,
Chris
CVF-Z (1503) | FX-8350 @ 4.6ghz @ 1.48125v | cpu/nb @ 2600 @ 1.35v | ht @ 2600 | 8gb (2x4) Redlines (996997) @ DDR3-2133 (9-11-10-28-1T ) | GTX 570 | 850Z PSU
The administrator has disabled public write access.
Time to create page: 0.188 seconds